Blocked drains are a bummer, but there are many ways to fix the problem. In this brief guide, we will look at ten simple ways to unclog a blocked drain in your home.
How to Clear a Blocked Drain
There are many different ways that you can potentially unclog a blocked drain. It usually depends on the severity of the block, but here are ten methods that might do the trick.
Boiling water can be an effective method of clearing a clogged drain. You simply pour boiling water down the drain and leave it for about 15 minutes before running cold water through the drain.
You can also use vinegar or baking soda to clear a clogged drain. Simply pour either of these substances down your drain and allow them to work their magic on the accumulated matter in your pipes before rinsing with some water.
These cleaners are very strong and should only be used if you know what you’re doing. It’s important to not use caustic cleaners more than once every three months or so because they can damage your pipes over time if used too frequently.
If you have a blocked drain, you can sometimes use a plunger to clear it. Plungers are inexpensive and easy to use. Simply place the suction end of the plunger over the opening of your drain and pump until water starts flowing again.
DIY drain snake
A DIY drain snake is a long wire with sharp edges on the end that help to break up clogs and push them through the pipes. These devices are usually sold as part of an all-in-one kit, which includes a handle for pulling out debris from the pipes.
Plumbers drain snake
A plumber’s drain snake is similar to the DIY version but is designed for more heavy-duty use. It has thicker coils and may be made of metal rather than plastic or rubber, like many of the DIY versions.
A CCTV camera can be used to inspect the inside of your drainpipe. This can help you determine where the blockage is and what caused it. With this info, you can then proceed to use either chemicals or a snake, depending on the situation.
If your drain is just partially clogged, this is a good option. A hydro jet can be rented at most home improvement stores, and it shoots pressurized water down the drain to clear out whatever is blocking it.
The excavating method involves digging down to your sewer pipes and removing any debris that may be holding them back. This process can be time-consuming and costly, but it can also be very effective in clearing blockages when other methods fail.
This method involves the use of a special compound that is injected into your pipes to restore their original shape. The compound then hardens to form a waterproof seal around the pipe, preventing any further blockages.
If none of the methods above work, then you will need to call a plumber for a CCTV drain inspection. This will show you exactly what the issue is so that you can take action accordingly and restore your drains to working condition. Here you can visit alltimesmagazine to get the latest news around the world.